Fillers + Additives
Metal Powders
Available in BRONZE, BRASS, COPPER, IRON and TIN
These fillers are commonly used in resins for producing Cold Cast Metal effects. Generally, higher amounts of metal powder up to 60% of casting resin, are used to give a true metallic effect. Can be buffed, polished and a patina applied if required.
Size: 100gm, 500gm, 1kg, 5kg, 10kg, 20kg,
Left - Shield in Brass Powder in resin, lacquered.
Top Right - Shield in Copper Powder in resin, polished.
Right - Crest in Bronze powder, stained and sealed.
Bronze
Brass
Copper
Iron
Tin
Pool Dust
A sugar crystal sized grade of calcium carbonate. Imparts a glistening effect onto resin when mixed. Can also be used in Plasters, including FortonMG and Gardencast.
Size: 500gm, 1kg, 4kg, 8kg, 25kg
Slate Powder
A general filler for 'bulking out' resins. Fantastic in clear polyester resin to create black bases and busts.
Size: 500gm,1kg, 5kg, 25kg
Industrial Talc
TopMark's Industrial Talc is classed as technical grade, can be used as an extender, filler pigment in paint, rubber, ink, in plastics and as a mold release.This Industrial Talc in not to be used as body talc, dusting powder etc.
May be used as a mold release for modeling clay push molds. Talc can be lightly brushed into interior mold surfaces of both positive and negative, taking care not to fill fine detail, to reduce surface tension of poured urethane and urethane foam reducing air bubbles in cured resin.
Pure white to grey powder with pearly luster; insoluble in water; no odour; slippery feel; high resistance to heat. Talc is native hydrous magnesium silicate.
Size: 500g 2kg 5kg 25kg.
Cabosil
Used as a universal thickener. It is extremely light in weight. Caution should be taken when using this material as it can be hazardous if inhaled. Use of Dust masks, goggles and gloves are recommended.
Size: 100ml, 100g, 1kg, 10kg
Marble Chip
A coarse marble chip for use in almost any resin or products like Winterstone and Gardencast. Popular as a filler in standard white cement.
Size: 8kg, 25kg
Back to top