Urethane Paints
Flexible Paint System
These are hazardous materials , limited stocks held, to order only.SC-89 Series is a non-yellowing, flexible urethane coating which dries by solvent evaporation. SC-89 series offers the following characteristics:
- Non-yellowing, Aliphatic material
- High Tensile Strength
- High Elongation at 700%
- Excellent impact resistance
- Outstanding abrasion resistance
- Solvent resistant
- Exceptional gloss and colour retention
- Low temperature flexibility
Available in Clear Gloss and Clear Flat. Can be used as a stretch coating for fabrics, latex, foam, rubber and polyurethane elastomers.
Size: 1ltr, 5ltr, 19ltr
SC-89 Thinners
This thinner is recommended for use with BJB's SC-89 series paints. It may also be used as a part cleaner prior to painting.
Hazardous material, to order only, requires special handling.
Size: 1ltr, 5ltr, 20ltr
TC-89 Primer
This two part primer was developed to apply against cured urethane substrates for achieving good adhesion when applying another urethane product for painting or bonding applications.
Hazardous material, to order only, requires special handling.
Size: 1.1ltr, 5.5ltr, 22ltr
SC-80 Waterbased Primer
SC-80 primer is a water-based product designed to enhance adhesion of polyurethane paints, PAX paint and some other paint systems to urethane foams and foam latex. Not for use on urethane elastomers such as Flexicast series or F Series products. Also used in conjunction with SC115.
Size: 125ml, 250ml, 500ml, 5ltr, 19ltr
SC115 Waterbased Coating
SC115 is a water based, aliphatic polyurethane coating. This product when brushed or sprayed will air dry quickly to form a soft, stretch elastomeric coating. It is non-yellowing, 600% elongation, exceptional gloss and has good water resistance.
Size: 500ml, 1ltr, 5ltr, 19ltr
SC92 Waterbased Coating
SC92 is a water based aliphatic polyurethane coating designed to provide a final finish or paintable surface for various flexible polyurethane foams, elastomers, and latex products. It can also be used as an in-mold coating for casting or brushing polyurethane products behind.- Provides a uniform semi-gloss finish
- Clear base is easy to tint or pigment
- Excellent colour retention
- High elongation and tear resistance.
Sizes: 100ml, 900ml
- No Comments Found. Submit Comment
Back to top