Silicone Accessories
KE45T
Translucent, thixotropic one component material. Shore 30A paste consistency that can be easily pigmented. Dilute with solvents such as D-Limonene and airbrush or brush onto a soft silicone to produce great surface effects.
Size: 100g, 290g
Technical Information:
Data Sheet - MSDS
Silicone Adhesives
E41 is a transparent clear, flowable, one-component, acetic cure silicone with excellent mechanical properties. Excellent primerless adhesion properties.
Size: 93g, 330g
Technical Information:
Data Sheet - MSDS
E43 is a transparent black, self-levelling, one-component, acetic cure silicone with very good mechanical properties. Excellent primerless adhesion properties.
Size: 98g, 330g
Technical information:
Data Sheet - MSDS
D-Limonene
A biodegradable solvent occurring in nature as the main component of citrus peel oil. It has a pleasant citrus aroma and has a FDA-GRAS rating (is generally recognised as safe.) Replacement for toxic solvents. Can be used to thin KE45T.
Size: 500ml, 1ltr, 5ltr or 19ltr
Silicone Diluent
A non-reactive fluid used as a diluent. When used in small amounts of up to 10% it allows for retention of physical properties while reducing the viscosity of the total system. Used with silicones like Soft Translucent of amounts up to 30%, it will allow for the production of floppy 'skinlike' material.
Size: 100ml, 1ltr, 5ltr, 20ltr & 200ltr
Thixotropic Additive M
A colourless, cloudy medium viscosity liquid with a faint odour. Exclusively used to thicken those condensation curing RTV-2 silicone rubber grades which are flowable as supplied. After mixing in measured catalyst, addition of 1 - 2% Thixo M, will produce a non-sag result.
Size: 50g, 100g, 500g
Protective Film SF-18
A solution of a modified polyvinyl butryal in ethyl alcohol (ethanol). Used for covering surfaces of models or other surfaces with which the uncured silicone rubber makes direct contact, to prevent vulcanization problems, eg amine-cured epoxy resins and some plasticines and styrene based products.
Size: 170g, 700g
MSDS
Stabiliser 43
A colourless, cloudy medium viscosity liquid with a faint odour. Exclusively used to thicken those addition curing RTV-2 silicone rubber grades of the elastosil M46.. series which are flowable as supplied. After mixing in catalyst, addition of 0.3 - 0.5% Stabiliser 43 will produce a non-sag result.
Size: 100g, 500g
Data Sheet - MSDS
G790 Primer
This primer is great for actually adhering the Wacker range of silicones to a substrate. The liquid rubber is poured against the primed rigid surfaces.
Size: 100g, 700g
MSDS
Back to top